Find a Service Center
- 4.5 in Shaft Diameter
- 5.5 in Housing Bore Diameter
- 0.44 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Type | Oil |
| Surface Speed [Nom] | 3,600 ft/min |
| Design | CRWH1 |
| Pressure | 10 psi |
| Housing Bore Dia. | 5.501 in |
| Temperature Range [Max] | 400 °F |
| Operating Temperature [Max] | 390 °F |
| Bore Sealant | Bore Tite |
| Inch/Metric | Inch |
| Case Material | Steel |
| Spring Type | Garter |
| Lip Style | Internal |
| Lubricant | Oil or Grease |
| Cover/Compensation Ring/Plate Required | No |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Solid | Yes |
| Construction | CRWH1 |
| Installation | Housing Press Fit |
| Seal Design | SKF Wave |
| Speed | 0.07 ft/min |
| Overall Width | 0.435 in |
| Case Construction | Steel Case w/Inner Case |
| Lip Type | Single Lip |
| Shaft Dia. | 4.5 in |
| Spring Material | Stainless Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Operating Temperature [Min] | -5 °F |
| Temperature Range [Min] | -40 °F |
| Seal Application | General Purpose |
| Case Design | Metal Case, Inner Case |
| Weight | 0.51 LB |
| EAN or UPC | 85311885225 |
