Find a Service Center
- 4.63 in Shaft Diameter
- 5.63 in Housing Bore Diameter
- 0.5 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Inch/Metric | Inch |
| Design | CRWH1 |
| Operating Temperature [Max] | 390 °F |
| Installation | Housing Press Fit |
| Case Material | Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Spring Type | Garter |
| Spring Material | Carbon Steel |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 4.625 in |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Construction | CRWH1 |
| Solid | Yes |
| Pressure | 10 psi |
| Case Construction | Steel Case w/Inner Case |
| Lubricant | Oil or Grease |
| Lip Type | Single Lip |
| Housing Bore Dia. | 5.626 in |
| Operating Temperature [Min] | -5 °F |
| Temperature Range [Max] | 400 °F |
| Lip Style | Internal |
| Bore Sealant | Bore Tite |
| Seal Type | Oil |
| Speed | 0.07 ft/min |
| Seal Application | General Purpose |
| Case Design | Metal Case, Inner Case |
| Seal Design | SKF Wave |
| Temperature Range [Min] | -40 °F |
| Overall Width | 0.5 in |
| Weight | 0.433 LB |
| EAN or UPC | 85311086981 |
