Find a Service Center
- 4.75 in Shaft Diameter
- 5.751 in Housing Bore
- 0.5 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Application | General Purpose |
| Pressure | 10 psi |
| Construction | CRW1 |
| Lip Type | Single Lip |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Inch/Metric | Inch |
| Housing Bore Dia. | 5.751 in |
| Spring Type | Garter |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Max] | 400 °F |
| Speed | 0.07 ft/min |
| Temperature Range [Min] | -40 °F |
| Solid | Yes |
| Surface Speed [Nom] | 3,600 ft/min |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -5 °F |
| Case Material | Steel |
| Seal Type | Oil |
| Operating Temperature [Max] | 390 °F |
| Case Design | Metal Case |
| Lip Style | Internal |
| Spring Material | Carbon Steel |
| Bore Sealant | Bore Tite |
| Case Construction | Steel Case w/o Inner Case |
| Design | CRW1 |
| Shaft Dia. | 4.75 in |
| Overall Width | 0.5 in |
| Seal Design | SKF Wave |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Installation | Housing Press Fit |
| Weight | 0.452 LB |
| EAN or UPC | 85311036597 |
