Find a Service Center
- 4.88 in Shaft Diameter
- 6 in Housing Bore Diameter
- 0.5 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Style | Internal |
| Seal Type | Oil |
| Case Construction | Steel Case w/Inner Case |
| Construction | CRWH1 |
| Temperature Range [Max] | 400 °F |
| Spring Type | Garter |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Design | CRWH1 |
| Case Material | Steel |
| Temperature Range [Min] | -40 °F |
| Housing Bore Dia. | 6.001 in |
| Speed | 0.07 ft/min |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Overall Width | 0.5 in |
| Spring Material | Carbon Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Design | Metal Case, Inner Case |
| Shaft Dia. | 4.875 in |
| Pressure | 10 psi |
| Bore Sealant | Bore Tite |
| Cover/Compensation Ring/Plate Required | No |
| Solid | Yes |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Surface Speed [Nom] | 3,600 ft/min |
| Seal Application | General Purpose |
| Operating Temperature [Max] | 390 °F |
| Operating Temperature [Min] | -5 °F |
| Installation | Housing Press Fit |
| Weight | 0.498 LB |
| EAN or UPC | 85311037006 |
