Find a Service Center
- 0.5 in Shaft Diameter
- 0.875 in Housing Bore
- 0.25 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Inch/Metric | Inch |
| Temperature Range [Max] | 400 °F |
| Case Material | Steel |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Housing Bore Dia. | 0.875 in |
| Seal Application | General Purpose |
| Construction | CRW1 |
| Lip Type | Single Lip |
| Case Design | Metal Case |
| Pressure | 10 psi |
| Installation | Housing Press Fit |
| Lip Style | Internal |
| Design | CRW1 |
| Bore Sealant | Bore Tite |
| Seal Design | SKF Wave |
| Case Construction | Steel Case w/o Inner Case |
| Temperature Range [Min] | -40 °F |
| Spring Material | Carbon Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 0.5 in |
| Solid | Yes |
| Seal Type | Oil |
| Overall Width | 0.25 in |
| Speed | 0.07 ft/min |
| Operating Temperature [Min] | -5 °F |
| Spring Type | Garter |
| Operating Temperature [Max] | 390 °F |
| Lubricant | Oil or Grease |
| Weight | 0.062 LB |
| EAN or UPC | 85311003322 |
