Find a Service Center
- 5.13 in Shaft Diameter
- 6.38 in Housing Bore Diameter
- 0.5 in Overall Width
- Fluoro Rubber (FKM) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Material | Fluorocarbon Rubber (FKM) |
| Installation | Housing Press Fit |
| Spring Material | Carbon Steel |
| Case Material | Steel |
| Case Design | Metal Case, Inner Case |
| Shaft Dia. | 5.125 in |
| Spring Type | Garter |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Min] | -5 °F |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Lip Type | Single Lip |
| Housing Bore Dia. | 6.375 in |
| Construction | CRWH1 |
| Pressure | 10 psi |
| Temperature Range [Min] | -40 °F |
| Bore Sealant | Bore Tite |
| Lubricant | Oil or Grease |
| Solid | Yes |
| Operating Temperature [Max] | 390 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Design | CRWH1 |
| Speed | 0.07 ft/min |
| Temperature Range [Max] | 400 °F |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Overall Width | 0.5 in |
| Seal Design | SKF Wave |
| Case Construction | Steel Case w/Inner Case |
| Weight | 0.528 LB |
| EAN or UPC | 85311037662 |
