Find a Service Center
- 6.5 in Shaft Diameter
- 8 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Pressure | 10 psi |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Inch |
| Case Design | Metal Case |
| Case Construction | Steel Case w/o Inner Case |
| Design | CRW1 |
| Construction | CRW1 |
| Lubricant | Oil or Grease |
| Spring Material | Carbon Steel |
| Shaft Dia. | 6.5 in |
| Lip Type | Single Lip |
| Spring Type | Garter |
| Bore Sealant | Bore Tite |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Design | SKF Wave |
| Case Material | Steel |
| Solid | Yes |
| Lip Style | Internal |
| Installation | Housing Press Fit |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Application | General Purpose |
| Overall Width | 0.5 in |
| Temperature Range [Max] | 225 °F |
| Housing Bore Dia. | 8 in |
| Seal Type | Oil |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Min] | -65 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Operating Temperature [Max] | 210 °F |
| Speed | 0.07 ft/min |
| Weight | 0.5 LB |
| EAN or UPC | 85311039239 |
