Find a Service Center
- 0.813 in Shaft Diameter
- 1.375 in Housing Bore
- 0.375 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Type | Oil |
| Spring Type | Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Construction | Steel Case w/o Inner Case |
| Construction | CRW1 |
| Solid | Yes |
| Temperature Range [Max] | 400 °F |
| Spring Material | Carbon Steel |
| Inch/Metric | Inch |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Speed | 0.07 ft/min |
| Seal Application | General Purpose |
| Surface Speed [Nom] | 959 ft/min |
| Case Design | Metal Case |
| Seal Design | SKF Wave |
| Operating Temperature [Min] | -5 °F |
| Case Material | Steel |
| Installation | Housing Press Fit |
| Overall Width | 0.375 in |
| Temperature Range [Min] | -40 °F |
| Pressure | 10 psi |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Housing Bore Dia. | 1.375 in |
| Lip Style | Internal |
| Bore Sealant | Bore Tite |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 0.813 in |
| Design | CRW1 |
| Operating Temperature [Max] | 390 °F |
| Weight | 0.073 LB |
| EAN or UPC | 85311006347 |
