Find a Service Center
- 8.38 in Shaft Diameter
- 9.88 in Housing Bore Diameter
- 0.63 in Overall Width
- Carboxylated Nitrile Rubber (XNBR) Lip Material
- Inch
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lubricant | Oil or Grease |
| Construction | HDS3 |
| Lip Type | Single Lip |
| Temperature Range [Max] | 250 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Housing Bore Dia. | 9.88 in, 250.83 mm |
| Speed | 0.1 ft/min |
| Pressure | 15 psi |
| Case Construction | Steel Case w/Inner Case w/4 Adjustable Lugs |
| Seal Design | Assembled Design |
| Design | HDS3 |
| Spring Material | Stainless Steel |
| Seal Application | General Purpose |
| Case Material | Steel |
| Installation | Housing Press Fit |
| Overall Width | 0.63 in, 15.88 mm |
| Lip Material | Carboxylated Nitrile Rubber (XNBR) |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Inch |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 8.38 in, 212.73 mm |
| Case Design | Metal Case, Spacer Lugs |
| Temperature Range [Min] | -40 °F |
| Lip Style | Internal |
| Spring Type | Garter Spring Cover |
| Operating Temperature [Max] | 210 °F |
| Weight | 3.215 LB |
| EAN or UPC | 85311087612 |
