Find a Service Center
Alternate Products
- 0.969 in Shaft Diameter
- 1.624 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Application | General Purpose |
| Spring Type | Garter |
| Operating Temperature [Min] | -40 °F |
| Bore Sealant | Bore Tite |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Construction | CRW1 |
| Lip Style | Internal |
| Temperature Range [Max] | 225 °F |
| Solid | Yes |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Lip Material | Nitrile Rubber (NBR) |
| Installation | Housing Press Fit |
| Case Material | Steel |
| Housing Bore Dia. | 1.624 in |
| Lip Type | Single Lip |
| Surface Speed [Nom] | 1,142 ft/min |
| Design | CRW1 |
| Spring Material | Carbon Steel |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Min] | -65 °F |
| Shaft Dia. | 0.969 in |
| Case Construction | Steel Case w/o Inner Case |
| Speed | 0.07 ft/min |
| Overall Width | 0.25 in |
| Pressure | 10 psi |
| Seal Design | SKF Wave |
| Case Design | Metal Case |
| Seal Type | Oil |
| Weight | 0.075 LB |
| EAN or UPC | 85311007511 |
