Find a Service Center
- 1 in Shaft Diameter
- 1.437 in Housing Bore
- 0.25 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Min] | -5 °F |
| Temperature Range [Min] | -40 °F |
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 390 °F |
| Design | CRW1 |
| Housing Bore Dia. | 1.437 in |
| Bore Sealant | Bore Tite |
| Case Material | Steel |
| Inch/Metric | Inch |
| Installation | Housing Press Fit |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Spring Material | Carbon Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Speed | 0.07 ft/min |
| Case Design | Metal Case |
| Lubricant | Oil or Grease |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Shaft Dia. | 1 in |
| Temperature Range [Max] | 400 °F |
| Overall Width | 0.25 in |
| Case Construction | Steel Case w/o Inner Case |
| Lip Style | Internal |
| Spring Type | Garter |
| Seal Type | Oil |
| Surface Speed [Nom] | 1,179 ft/min |
| Pressure | 10 psi |
| Construction | CRW1 |
| Solid | Yes |
| Weight | 0.071 LB |
| EAN or UPC | 85311008006 |
