Find a Service Center
Alternate Products
- Radial Shaft Seal
- 98 mm Shaft Diameter
- 120 mm Housing Bore Diameter
- 12 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Cover/Compensation Ring/Plate Required | No |
| Spring Material | Carbon Steel Garter |
| Pressure | 10 psi |
| Seal Type | Oil |
| Seal Design | SKF Wave |
| Seal Application | General Purpose |
| Temperature Range [Max] | 400 °F |
| Overall Width | 12 mm |
| Inch/Metric | Metric |
| Lip Type | Single Lip w/Spring |
| Surface Speed [Nom] | 3,600 ft/min |
| Construction | CRW1 |
| Shaft Dia. | 98 mm |
| Temperature Range [Min] | -40 °F |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Housing Bore Dia. | 120 mm |
| Case Construction | Steel Case w/o Inner Case |
| Weight | 0.302 LB |
| EAN or UPC | 85311033701 |
