Find a Service Center
- Grease
description
- A mineral oil based grease, using a lithium-calcium soap. Its high content of molybdenum disulphide and graphite, in conjunction with an extremely high viscosity oil, provide outstanding protection under the harshest conditions involving high loads, slow rotations and severe vibrations.
features
- Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a situation where microslip is likely to occur
- Extremely mechnically stable providing good water resistance and corrosion protection
| EP Performance - 4 Ball - Wear Scar [Max] | 1.2 mm (DIN 51350/5, 1400N) |
| Base Oil Viscosity DIN 51562 at 212 °F | 47 mm²/s |
| Penetration (DIN ISO 2137 Prolonged) [Max] | +50 |
| NLGI Grade | 2 |
| Oil Separation (DIN 51817, 104 °F) | 1-5 |
| Base Oil | Mineral |
| Dropping Point [Min] | 356 °F |
| Operating Temperature [Max] | 248 °F |
| Color | Black |
| Corrosion Protection - Distilled Water | 0-0 (EMCOR, ISO 11007) |
| Base Oil Viscosity DIN 51562 at 104 °F | 1020 mm²/s |
| NLGI No. | 2 |
| Thickener | Lithium, Calcium |
| Shelf Life | 5 Years |
| Corrosion Protection - Water Washout | 0-0 (EMCOR, ISO 11007) |
| EP Performance - 4 Ball - Weld Load [Min] | 3000 N |
| Rolling Bearing Grease Life [Max] | 1000 at 212 °F |
| Available For Single Point Lubrication | No |
| Operating Temperature [Min] | 14 °F |
| Water Resistance [Max] | 1 |
| Corrosion Protection - 0.5% NaCl | 2-2 (EMCOR, ISO 11007) |
| Mechanical Stability - Roll Stability, ASTM D1831 [Max] | +50 |
| Penetration (DIN ISO 2137 Worked 60 Strokes) | 265 - 295 |
| Lubrication Ability | Pass at 212 °F |
| Copper Corrosion [Max] | 1 Maximum |
| Mechanical Stability, V2F Test, 144 hrs | M |
| Low Temperature Torque | 150/100 @ 14 °F |
| Weight | 43.343 LB |
| EAN or UPC | 7316577745590 |
