Find a Service Center
Alternate Products
- 2.6875" Shaft, 4.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Pillow Block Type | Thru-Bolt |
| Bearing Insert | GN211KRRB |
| Base Length | 15 3/8 in |
| Housing Material | Cast Iron |
| Collar No. | SO211K |
| End Type | Open End |
| Shaft Dia. | 2.6875 in |
| Base Width | 4 3/8 in |
| Locking Device | Eccentric Locking Collar |
| Housing Construction | 1 Piece |
| Seal Type | Contact Seals |
| Bolt Hole Length | 1 in |
| Base Height | 1 3/4 in |
| Bearing Type | Ball Bearing |
| Lubrication | Relubricatable |
| Length Through Bore | 3.5 in |
| Bolt Size | 7/8 in |
| Bolt Holes | 2 |
| Inch/Metric | Inch Bore |
| Series | RSAO Series |
| Bearing Design | Non-Expansion |
| Insert Type | Steel Insert |
| Overall Width | 4 3/8 in |
| Collar O.D. | 4 in |
| Mounted Unit Duty | Heavy-Duty |
| Bolt Hole Spacing | 12 in |
| Housing Width | 7 7/16 in |
| Housing Height | 8 9/32 in |
| Bolt Hole Width | 1 3/8 in |
| Weight | 41.948 LB |
| EAN or UPC | 87796061828 |
