- Single Row Radial Bearing, 1.25" ID x 2.25" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Width | 3/8 in |
| Cage Material | Steel |
| I.D. | 1 1/4 in |
| O.D. Type | Straight |
| Bearing Type | Radial |
| O.D. | 2.25 in |
| Pre Lubricant | None |
| Fillet Radius | 0.031 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Bore Type | Round Bore |
| Contact Angle | 0° |
| Capacity | Standard Capacity |
| Snap Ring | No Snap Ring |
| Enclosure | Open |
| Inch/Metric | Inch Bore |
| Preload Level | None |
| icNumber | 7697582 |
| Origin | Single Row Radial |
| No. in Set | Single Bearing |
| Seal Material | None |
| Locking Device | No Locking Device |
| Precision | Standard |
| Radial Internal Clearance | C3 |
| Outer Ring Width | 3/8 in |
| Dynamic Load Rating | 2750 lbf |
| Rows of Balls | Single |
| Inner Ring Width | 3/8 in |
| Static Load Rating [Max] | 1340 lbf |
| Cage Type | Metal |
| Precision Level | Standard (ABEC 1) |
| Seal Type | Unsealed |
| Material | Steel |
| Lubricant | Oil Preservative |
| Ball Material | Steel |
| Weight | 0.22 LB |
| EAN or UPC | 87796040472 |
| NSN Number | 3110-00-554-2917, 3110-00-812-3605 |

