Find a Service Center
Alternate Products
- 75 mm Shaft, 84.14 mm Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Housing Height | 163.5 mm |
| Collar O.D. | 91.92 mm |
| Overall Width | 85.73 mm |
| Series | YAK Series |
| Seal Type | Contact Seals |
| Base Length | 304.8 mm |
| Shaft Dia. | 75 mm |
| Bolt Hole Spacing Range [Min] | 209.5 |
| Bolt Hole Spacing Range [Max] | 223.1000 mm |
| Lubrication | Relubricatable |
| Bearing Type | Ball Bearing |
| Housing Construction | 1 Piece |
| Base Height | 38.1 mm |
| Bearing Insert | GYE75KRRB |
| Length Through Bore | 77.8 mm |
| Inch/Metric | Metric Bore |
| Housing Material | Cast Iron |
| Bolt Holes | 2 |
| Bolt Size | M20 |
| Bolt Hole Spacing | 241.3 mm |
| Pillow Block Type | Thru-Bolt |
| Bearing Design | Non-Expansion |
| Mounted Unit Duty | Normal-Duty |
| Base Width | 82.5 mm |
| Locking Device | Setscrew Locking Collar |
| Insert Type | Steel Insert |
| End Type | Open End |
| Weight | 17.95 LB |
| EAN or UPC | 87796169999 |
