Find a Service Center
- 1.25" Shaft, 1.5625" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Locking Device | Setscrew Locking Collar |
| Bolt Hole Spacing | 4 5/8 in |
| Bolt Holes | 2 |
| Base Height | 17/32 in |
| Lubrication | Relubricatable |
| Length Through Bore | 1.5 in |
| Pillow Block Type | Thru-Bolt |
| Temperature Range [Max] | 250 °F |
| Series | Survivor™ PT Series |
| Bolt Size | 1/2 in |
| Bearing Design | Non-Expansion |
| Seal Type | Contact Seals |
| Bearing Insert | GY1103KRRB3TDCF |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Shaft Dia. | 1.25 in |
| Insert Type | Steel Insert |
| Bearing Type | Ball Bearing |
| Housing Material | Polymer |
| Base Width | 1 9/16 in |
| Base Length | 6 3/16 in |
| Collar O.D. | 1.587 in |
| End Type | Open End |
| Housing Height | 3 5/32 in |
| Inch/Metric | Inch Bore |
| Overall Width | 1 21/32 in |
| Housing Construction | 1 Piece |
| Bolt Hole Spacing Range [Max] | 5 9/16 in |
| Weight | 1.13 LB |
| EAN or UPC | 87796189225 |
