Find a Service Center
Alternate Products
- 2.6875" Shaft, 3" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bolt Holes | 2 |
| Bearing Design | Non-Expansion |
| Bearing Insert | GY1211KRRB |
| Base Height | 1 5/16 in |
| Series | YAK Series |
| Bolt Hole Spacing Range [Min] | 6 5/8 in |
| Bolt Size | 3/4 in |
| Lubrication | Relubricatable |
| Housing Height | 6 1/16 in |
| Bolt Hole Spacing | 8 in |
| End Type | Open End |
| Shaft Dia. | 2.6875 in |
| Inch/Metric | Inch Bore |
| Length Through Bore | 2.75 in |
| Base Width | 2 7/8 in |
| Locking Device | Setscrew Locking Collar |
| Overall Width | 3 1/8 in |
| Bolt Hole Spacing Range [Max] | 9 3/8 in |
| Pillow Block Type | Thru-Bolt |
| Housing Material | Cast Iron |
| Insert Type | Steel Insert |
| Base Length | 10 1/2 in |
| Seal Type | Contact Seals |
| Housing Construction | 1 Piece |
| Mounted Unit Duty | Normal-Duty |
| Bearing Type | Ball Bearing |
| Collar O.D. | 3.422 in |
| Weight | 16.18 LB |
| EAN or UPC | 87796157620 |
