Find a Service Center
- 2.4375" Shaft, 2.6875" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
- The patented Survivor™ PT polymer-housed units have been tested to withstand a wide range of highly corrosive chemicals commonly found in food and beverage processing industries. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F). The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Width | 2 3/8 in |
| Insert Type | Steel Insert |
| Inch/Metric | Inch Bore |
| Bearing Design | Non-Expansion |
| Housing Material | Cast Iron |
| Housing Construction | 1 Piece |
| Shaft Dia. | 2.4375 in |
| Seal Type | Contact Seals |
| End Type | Open End |
| Bolt Hole Spacing Range [Max] | 8 9/16 in |
| Bearing Type | Ball Bearing |
| Length Through Bore | 2.5625 in |
| Bearing Insert | GY1207KRRB |
| Base Height | 7/8 in |
| Collar No. | N/A |
| Bolt Hole Spacing Range [Min] | 6 1/4 in |
| Pillow Block Type | Thru-Bolt |
| Overall Width | 2 3/4 in |
| Lubrication | Relubricatable |
| Bolt Hole Spacing | 7 13/32 in |
| Bolt Holes | 2 |
| Series | YAK Series |
| Locking Device | Setscrew Locking Collar |
| Housing Height | 5 13/32 in |
| Mounted Unit Duty | Normal-Duty |
| Base Length | 9 7/16 in |
| Collar O.D. | 3.011 in |
| Bolt Size | 5/8 in |
| Dynamic Load Rating | 13400 lbf |
| Weight | 9.786 LB |
| EAN or UPC | 87796157613 |
