Find a Service Center
Alternate Products
- 20 mm Shaft, 31.75 mm Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Length Through Bore | 30.9 mm |
| Housing Construction | 1 Piece |
| Base Width | 31.8 mm |
| Collar O.D. | 27.56 mm |
| Bolt Hole Spacing Range [Max] | 155.8000 mm |
| Insert Type | Steel Insert |
| Lubrication | Relubricatable |
| Bearing Type | Ball Bearing |
| Bolt Holes | 2 |
| Base Height | 11.9 mm |
| Mounted Unit Duty | Normal-Duty |
| Bearing Design | Non-Expansion |
| Seal Type | Contact Seals |
| Housing Material | Cast Iron |
| Locking Device | Setscrew Locking Collar |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing | 96 mm |
| Inch/Metric | Metric Bore |
| Bolt Hole Spacing Range [Min] | 76.2000 mm |
| Base Length | 127 mm |
| End Type | Open End |
| Housing Height | 62.7 mm |
| Bolt Size | M10 |
| Bearing Insert | GYE20KRRB |
| Overall Width | 34.13 mm |
| Shaft Dia. | 20 mm |
| Series | YAK Series |
| Weight | 1.494 LB |
| EAN or UPC | 87796169623 |
