Find a Service Center
Alternate Products
AMI Bearings Inc.
KHLP202-10
Narrow Inner Ring Cast Iron Housing Material Pillow Block
Item #101502880
AMI Bearings Inc.
UCLP202-10
Wide Inner Ring Cast Iron Housing Material Pillow Block
Item #101505852
- 0.625" Shaft, 1.0625" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Collar O.D. | 0.9 in |
| Bearing Type | Ball Bearing |
| Bolt Size | 3/8 in |
| Overall Width | 1 7/32 in |
| Bolt Hole Spacing | 3 5/8 in |
| Inch/Metric | Inch Bore |
| Insert Type | Steel Insert |
| Base Length | 4 7/8 in |
| Base Width | 1 3/16 in |
| Shaft Dia. | 0.625 in |
| Housing Material | Cast Iron |
| Housing Height | 2 3/32 in |
| Lubrication | Relubricatable |
| Mounted Unit Duty | Normal-Duty |
| Bolt Hole Spacing Range [Min] | 2 3/4 in |
| Series | YAK Series |
| Bolt Holes | 2 |
| Bearing Insert | GY1010KRRB |
| Bolt Hole Spacing Range [Max] | 4 1/2 in |
| End Type | Open End |
| Housing Construction | 1 Piece |
| Seal Type | Contact Seals |
| Locking Device | Setscrew Locking Collar |
| Base Height | 11/32 in |
| Bearing Design | Non-Expansion |
| Length Through Bore | 1.07813 in |
| Pillow Block Type | Thru-Bolt |
| Weight | 0.92 LB |
