Find a Service Center
Boston Gear
HF7718-10-B5-H-P16
700 Series 10:1 Ratio Hollow Assembly Single Reduction Worm Gear Reducer Without Base
Item #101794155
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- High loads, high ambient or operating temperatures, and unusually contaminated atmospheres will require more frequent relubrication.
| HP @ RPM | 1 hp @ 1800 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Input (Shaft or Bore) Size | 5/8 in |
| Style | Right Angle |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Shaft Assembly Code | H |
| Center Distance Code | 718 |
| Use With | 718 |
| Media Mapping Hollow Bore | P16 |
| Series | 700 |
| Box Height | 5 3/4 in |
| Fan Cooled | No |
| Output Shaft Projection | Hollow Output |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Ratio | 10:1 |
| Worm Position | Universal |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Input Motor HP | 1.50 |
| Output Bore Shaft Dia. | 1 in |
| Media Mapping Style | HF |
| Base Mounting Attachment | No Base |
| Output Shaft | Hollow |
| Center Distance | 1.75 in |
| Bore Code | B5 |
| Washdown Duty | No |
| Output Torque @ RPM | 480 in lb @ 1150 rpm, 536 in lb @ 1750 rpm |
| Rated Efficiency | 92% |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Output Speed | 175 rpm |
| Housing Material | Cast Iron |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Motor Application | General Purpose |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Output (Shaft or Bore) Size | 1 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Lubrication | None |
| Frame Size | 56C |
| Input Configuration | C-Face Quilled |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Reduction Type | Single |
| Motor Frame Size | B556C |
| Standard | AGMA Service Class I |
| Box Length | 5 1/2 in |
| Motor HP | 1 hp |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Torque Out @ 1150 rpm | 480 in lb |
| Frame | 56C |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Input HP @ RPM | 0.98 hp @ 1150 rpm, 1.61 hp @ 1750 rpm |
| Output Torque | 536 lb-in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Keyway Size | 3/16 x 3/32 |
| Media Mapping Output | H |
| Family Name | HF |
| Output Configuration | Hollow Output |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Torque Out @ 1750 rpm | 536 in lb |
| Box Width | 4 37/64 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Weight | 20.1 LB |
| EAN or UPC | 781711630143 |
