8100WD

description

• Two wheels 8" x 1" x 3/4". Guards are cast iron, exhaust type. Supplied with cast iron tool rests and GA9 lighted eyeshields.

features

• Grinders supplied with one 36 grit and one 60 grit grinding wheel
• grinder/buffers supplied with one 36 grit grinding wheel and one wire brush wheel 0.014" wire
• 115 V and 115/230 V, single phase, 60 Hz units are supplied with start/stop switch, 8 ft 3" conductor cord with plug connected for 115 V
• 115/230 V units are reconnectable for 230 V with plug change
• No cord or plug supplied

includes

• Supplied with GA24 water pot, GA25 tool tray, and two GA9 lighted eyeshields wired through the start/stop switch of the single phase units only. Light bulbs are not supplied. Rough-service bulbs, max. 60 W, suggested.
• Grinders supplied with one 36 grit and one 60 grit grinding wheel
• grinder/buffers supplied with one 36 grit grinding wheel and one wire brush wheel 0.014" wire
• 115 V and 115/230 V, single phase, 60 Hz units are supplied with start/stop switch, 8 ft 3" conductor cord with plug connected for 115 V
• 115/230 V units are reconnectable for 230 V with plug change
• No cord or plug supplied

compliances

• 0