Skip to content Skip to navigation menu
SCM Series Medium-Duty 2-Bolt Pillow Block

P2BSCM103

SCM Series Medium-Duty 2-Bolt Pillow Block
Item #100733473
  • 2 Bolts
  • Cast Iron Housing Material
  • Solid Housing Construction
  • Steel Insert Material
SCM Series Medium-Duty 2-Bolt Pillow Block
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 2 Bolts
  • Cast Iron Housing Material
  • Solid Housing Construction
  • Steel Insert Material

applications

  • Air handling
  • Unit handling
  • Food and beverage
  • Forest products
  • Paper
  • Automotive
  • Chemical
  • Packaging and processing

features

  • Medium-duty utilizes larger rings and housing compared to standard-duty
  • Inner and outer rings are precision hardened and honed for wear resistance and quiet operation
  • DualGuard sealing system includes a mechanically retained, land riding, single lip contact seal plus a patented rubberized flinger for enhanced protection against contaminants
  • Ball cage is made of heat stabilized nylon with fiberglass reinforcement, which allows higher operating temperatures and greater flexibility with added strength
  • Anti-rotation pin makes insert replacement easier with no need to replace grease fittings or location pins
  • 65° set screw spacing offers an optimum balance between locking force and inner ring stress
  • Open and closed safety covers available
Bolt to Bolt [Max] 5.44 in
Shaft Dia. 1.1875 in
Outer Ring Size 207
Length Through Bore 1 17/32 in
Pillow Block Type Thru-Bolt
Base to Center Height 1.88 in
Misalignment Range ±2°
Bolt Hole Spacing Range [Max] 5 7/16 in
Shaft Attachment Setscrew
Expansion Capability Fixed
Speed [Max] 3500 rpm
Bearing Insert INSSCM103
Insert Type Steel Insert
Seal Type Contact Seals
Mounted Unit Duty Medium-Duty
Standoff Housing No
Base Height 23/32 in
Base Length 6 1/2 in
Housing Construction Solid
Take-Up Frame Size LD-20, TS-250
Bore Length 1.71 in
Dynamic Load Capacity 5759 lbf
Ball Bearing Series 207 Series
Locking Device Setscrew Locking Inner Ring
Greasable Yes
Bolt Hole Length 15/16 in
Bolt to Bolt [Min] 4.68 in
Sensor Ready Adapter Required
Bolt Holes 2
Lubrication Grease
Series P2BSCM
Bolt Diameter 0.5 in
Static Load Capacity 3461 lbf
Housing Height 3 3/4 in
No. of Bolts 2
Suitable for High Temperature No
Base Width 1 3/4 in
Bearing Type Ball Bearing
Housing Material Cast Iron
Insert Material Steel
Suitable For Washdown No
Grease Name Unirex N2
Bearing Design Non-Expansion
Inch/Metric Inch Bore
End Type Open End
Bolt Hole Spacing Range [Min] 4 11/16 in
Bolt Hole Spacing 5 1/16 in
Weight 3.37 LB
EAN or UPC 782475593880
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison