Find a Service Center
Boston Gear
7726-10-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805886
- 3 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Axial rating will reduce by 50% unless an EP (Extreme Pressure) grease or oil lubrication is used.
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Input Configuration | Shaft Input |
| Media Mapping Output | G |
| Output Bore Shaft Dia. | 1.125 in |
| Motor Application | General Purpose |
| Torque Out @ 1750 rpm | 1345 in lb |
| Reduction Type | Single |
| Input Motor HP | 3 |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Base Mounting Attachment | No Base |
| Bolt Center | 8 in x 5 1/4 in |
| HP @ RPM | 3 hp @ 1800 rpm |
| Output Shaft | Solid |
| Family Name | Std Unit |
| Output Speed | 175 rpm |
| Input HP @ RPM | 2.82 hp @ 1150 rpm, 3.94 hp @ 1750 rpm |
| Standard | AGMA Service Class II |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Use With | 726 |
| Box Height | 8 in |
| Input Power Rating | 3.94 hp, 2.938 kW |
| Housing Material | Cast Iron |
| Output Configuration | Left Output |
| Shaft Assembly Code | G |
| Center Distance Code | 726 |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Rated Efficiency | 95% |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Output Torque @ RPM | 1345 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Max. Input HP @ 100 rpm | 0.37 hp |
| Fan Cooled | No |
| Box Length | 7 3/8 in |
| Series | 700 |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Output Torque | 1345 lb-in |
| Output Shaft Projection | Solid Left Output |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Worm Position | Universal |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Width | 4 7/16 in |
| Lubrication | None |
| Input (Shaft or Bore) Size | 3/4 in |
| Style | Right Angle |
| Center Distance | 2.625 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Frame Size | Shaft Input, Not a C-Face |
| Material | Cast Iron, Standard Paint |
| Ratio | 10:1 |
| Frame | N/A |
| Torque Out @ 1150 rpm | 1390 in lb |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Washdown Duty | No |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Weight | 41.1 LB |
| EAN or UPC | 781711517383 |
