Find a Service Center
Boston Gear
760-60F-G
700 Series 60:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101853872
- 5 Input Motor hp
- 700 Series
- 6 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| HP @ RPM | 5 hp @ 1800 rpm |
| Style | Right Angle |
| Base to Centerline of Input Shaft | 12 1/2 in |
| Input Motor HP | 5 |
| Series | 700 |
| Output (Shaft or Bore) Size | 2 1/4 in |
| Ratio | 60:1 |
| Box Length | 14 1/2 in |
| Box Height | 16 1/2 in |
| Bolt Center Length x Bolt Center Width | 16 1/2 in x 9 1/2 in |
| Max. Overhung Load @ 1750 rpm | 2400 lb/in |
| Input Power Rating | 6.29 hp, 4.69 kW |
| Base to Shaft Center Height w/Low Vert. Base Kit | 7.31 in |
| Bolt Centers w/ Vertical Base Kits (in) | 20.88 x 11.75 |
| Motor Application | General Purpose |
| Base to Shaft Center Height w/Std. Base Kit | 7 3/4 in |
| Shaft Assembly Code | G |
| Output Torque | 9528 lb-in |
| Torque Out @ 1150 rpm | 11000 in lb |
| Input HP @ RPM | 4.84 hp @ 1150 rpm, 6.29 hp @ 1750 rpm |
| Rated Efficiency | 70% |
| Output Torque @ RPM | 9528 in lb @ 1750 rpm, 11000 in lb @ 1150 rpm |
| Max. Overhung Load @ RPM | 2400 lb/in @ 1150 rpm, 2400 lb/in @ 1750 rpm |
| Standard | AGMA Service Class II |
| Lubrication | None |
| Output Configuration | Left Output |
| Bolt Center | 16 1/2" x 9 1/2" |
| Output Speed | 29.2 rpm |
| Material | Cast Iron, Standard Paint |
| Housing Material | Cast Iron |
| Box Width | 8 1/8 in |
| Input Configuration | Shaft Input |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Max. Input HP @ 100 rpm | 0.74 hp |
| Max. Thrust Load @ RPM | 2100 lb/in @ 1150 rpm, 2100 lb/in @ 1750 rpm |
| Base Mounting Attachment | No Base |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Family Name | Std Unit |
| Media Mapping Output | G |
| Output Torque Rating Range [Max] | 10999 lb-in, 1249 Nm |
| Washdown Duty | No |
| Reduction Type | Single |
| Center Distance | 6 in |
| Base to Centerline of Output Shaft | 6 1/2 in |
| Output Shaft Projection | Solid Left Output |
| Center Distance Code | 760 |
| Max. Thrust Load @ 1150 rpm | 2100 lb/in |
| Frame | N/A |
| Output Bore Shaft Dia. | 2.25 in |
| Fan Cooled | Yes |
| Output Torque Rating Range [Min] | 8000 lb-in, 900 Nm |
| Frame Size | Shaft Input, Not a C-Face |
| Base to Shaft Center Height w/High Vert. Base Kit | 9.63 in |
| Torque Out @ 1750 rpm | 9528 in lb |
| Output Shaft | Solid |
| Worm Position | Universal |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Input (Shaft or Bore) Size | 1 1/2 in |
| Bolt Centers w/ Std. Base Kit (in) | 16 1/2 x 9 1/2 |
| Weight | 255.1 LB |
| EAN or UPC | 781711468180 |
