Find a Service Center
Boston Gear
F710-10-B4-H
700 Series 10:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809370
- 0.33 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Input Motor HP | 0.33 |
| Media Mapping Output | H |
| Base to Centerline of Output Shaft | 1.31 in |
| Input Configuration | C-Face Quilled |
| Center Distance | 1 in |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Box Height | 3 5/8 in |
| Input (Shaft or Bore) Size | 1/2 in |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Input HP @ RPM | 0.23 hp @ 1150 rpm, 0.44 hp @ 1750 rpm |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Bolt Center | 2 5/8" x 1 11/16" |
| Ratio | 10:1 |
| Lubrication | None |
| Motor Application | General Purpose |
| Style | Right Angle |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Reduction Type | Single |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Output (Shaft or Bore) Size | 1/2 in |
| Shaft Assembly Code | H |
| Housing Material | Cast Iron |
| Output Bore Shaft Dia. | 0.5 in |
| Rated Efficiency | 87% |
| Media Mapping Style | F |
| Motor Frame Size | B442CZ |
| Output Configuration | Left & Right Output |
| Frame | 42CZ |
| Box Length | 4 1/4 in |
| Fan Cooled | No |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Series | 700 |
| Output Shaft Projection | Solid Double Projecting Output |
| Keyway Size | 1/8 x 1/16 |
| Washdown Duty | No |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Motor HP | 0.3333 hp |
| Output Torque @ RPM | 118 in lb @ 1150 rpm, 138 in lb @ 1750 rpm |
| Output Shaft | Solid |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Center Distance Code | 710 |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Frame Size | 42CZ |
| Output Torque | 138 lb-in |
| Base Mounting Attachment | No Base |
| Box Width | 3 11/32 in |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Family Name | F |
| Output Speed | 175 rpm |
| Input Power Rating | 0.44 hp, 0.328 kW |
| Material | Cast Iron, Standard Paint |
| Torque Out @ 1750 rpm | 138 in lb |
| Torque Out @ 1150 rpm | 118 in lb |
| Worm Position | Universal |
| Standard | AGMA Service Class II |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base | No |
| Bore Code | B4 |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Use With | 710 |
| Weight | 10.1 LB |
| EAN or UPC | 781711518533 |
