Find a Service Center
Boston Gear
F710-10-B5-H
700 Series 10:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101800848
- 0.33 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Not recommended for use with bolted clamps
| Box Height | 3 5/8 in |
| Style | Right Angle |
| Torque Out @ 1150 rpm | 118 in lb |
| Motor Application | General Purpose |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Worm Position | Universal |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Base Mounting Attachment | No Base |
| Input Configuration | C-Face Quilled |
| Rated Efficiency | 87% |
| Input HP @ RPM | 0.23 hp @ 1150 rpm, 0.44 hp @ 1750 rpm |
| Output Torque | 138 lb-in |
| Shaft Assembly Code | H |
| Output Shaft | Solid |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Lubrication | None |
| Series | 700 |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Bore Code | B5 |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Ratio | 10:1 |
| Input Motor HP | 0.33 |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Bolt Center | 2 5/8" x 1 11/16" |
| Use With | 710 |
| Output Configuration | Left & Right Output |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Housing Material | Cast Iron |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Torque Out @ 1750 rpm | 138 in lb |
| Material | Cast Iron, Standard Paint |
| Output Bore Shaft Dia. | 0.5 in |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Frame Size | 56C |
| Output Torque @ RPM | 118 in lb @ 1150 rpm, 138 in lb @ 1750 rpm |
| Motor Frame Size | B556C |
| Box Width | 3 11/32 in |
| Media Mapping Output | H |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Speed | 175 rpm |
| Media Mapping Style | F |
| Standard | AGMA Service Class II |
| Input Power Rating | 0.44 hp, 0.328 kW |
| Base to Centerline of Output Shaft | 1.31 in |
| Base | No |
| Frame | 56C |
| Center Distance | 1 in |
| Keyway Size | 3/16 x 3/32 |
| Reduction Type | Single |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Motor HP | 0.3333 hp |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Family Name | F |
| Output (Shaft or Bore) Size | 1/2 in |
| Washdown Duty | No |
| Box Length | 4 1/4 in |
| Center Distance Code | 710 |
| Output Shaft Projection | Solid Double Projecting Output |
| Input (Shaft or Bore) Size | 5/8 in |
| Fan Cooled | No |
| Weight | 10.1 LB |
| EAN or UPC | 781711598306 |
