Find a Service Center
Boston Gear
F710-15-B4-H
700 Series 15:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834485
- 0.33 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Ratio | 15:1 |
| Shaft Assembly Code | H |
| Input HP @ RPM | 0.17 hp @ 1150 rpm, 0.33 hp @ 1750 rpm |
| Series | 700 |
| Center Distance Code | 710 |
| Worm Position | Universal |
| Output Speed | 116.7 rpm |
| Media Mapping Style | F |
| Box Height | 3 5/8 in |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Output Shaft | Solid |
| Fan Cooled | No |
| Box Length | 4 1/4 in |
| Style | Right Angle |
| Frame | 42CZ |
| Housing Material | Cast Iron |
| Standard | AGMA Service Class I |
| Output (Shaft or Bore) Size | 1/2 in |
| Motor HP | 1/4 hp |
| Center Distance | 1 in |
| Base to Centerline of Output Shaft | 1.31 in |
| Torque Out @ 1150 rpm | 125 in lb |
| Reduction Type | Single |
| Keyway Size | 1/8 x 1/16 |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Input (Shaft or Bore) Size | 1/2 in |
| Box Width | 3 11/32 in |
| Input Motor HP | 0.33 |
| Output Shaft Projection | Solid Double Projecting Output |
| Frame Size | 42CZ |
| Lubrication | None |
| Motor Application | General Purpose |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.25 hp @ 1800 rpm |
| Material | Cast Iron, Standard Paint |
| Output Bore Shaft Dia. | 0.5 in |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Media Mapping Output | H |
| Bolt Center | 2 5/8" x 1 11/16" |
| Output Torque @ RPM | 125 in lb @ 1150 rpm, 146 in lb @ 1750 rpm |
| Bore Code | B4 |
| Input Configuration | C-Face Quilled |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Output Configuration | Left & Right Output |
| Family Name | F |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Input Power Rating | 0.33 hp, 0.246 kW |
| Output Torque | 146 lb-in |
| Motor Frame Size | B442CZ |
| Base | No |
| Rated Efficiency | 82% |
| Torque Out @ 1750 rpm | 146 in lb |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Base Mounting Attachment | No Base |
| Max. Input HP @ 100 rpm | 0.023 hp |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Use With | 710 |
| Washdown Duty | No |
| Weight | 10.1 LB |
| EAN or UPC | 781711518564 |
