Find a Service Center
Boston Gear
F710-20-B5-G
700 Series 20:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835179
- 0.25 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- High loads, high ambient or operating temperatures, and unusually contaminated atmospheres will require more frequent relubrication.
| Output Configuration | Left Output |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Standard | AGMA Service Class I |
| Bolt Center | 2 5/8" x 1 11/16" |
| Washdown Duty | No |
| Output Shaft | Solid |
| Output Bore Shaft Dia. | 0.5 in |
| Output Torque @ RPM | 129 in lb @ 1150 rpm, 149 in lb @ 1750 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Motor HP | 1/4 hp |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Height | 3 5/8 in |
| Center Distance Code | 710 |
| Shaft Assembly Code | G |
| Output (Shaft or Bore) Size | 1/2 in |
| Lubrication | None |
| Bore Code | B5 |
| Ratio | 20:1 |
| Worm Position | Universal |
| Use With | 710 |
| Torque Out @ 1750 rpm | 149 in lb |
| Input Motor HP | 0.25 |
| Output Shaft Projection | Solid Left Output |
| Output Torque | 149 lb-in |
| Center Distance | 1 in |
| Base | No |
| Rated Efficiency | 77% |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Fan Cooled | No |
| Box Length | 4 1/4 in |
| Base Mounting Attachment | No Base |
| Input HP @ RPM | 0.14 hp @ 1150 rpm, 0.27 hp @ 1750 rpm |
| Style | Right Angle |
| Max. Input HP @ 100 rpm | 0.017 hp |
| Motor Frame Size | B556C |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Frame | 56C |
| Torque Out @ 1150 rpm | 129 in lb |
| Media Mapping Style | F |
| Input Power Rating | 0.27 hp, 0.201 kW |
| HP @ RPM | 0.125 hp @ 1200 rpm, 0.1666667 hp @ 1800 rpm |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Family Name | F |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| Motor Application | General Purpose |
| Frame Size | 56C |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Material | Cast Iron, Standard Paint |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Output Speed | 87.5 rpm |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Base to Centerline of Output Shaft | 1.31 in |
| Input Configuration | C-Face Quilled |
| Media Mapping Output | G |
| Reduction Type | Single |
| Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
| Series | 700 |
| Box Width | 3 11/32 in |
| Keyway Size | 3/16 x 3/32 |
| Housing Material | Cast Iron |
| Weight | 10.1 LB |
| EAN or UPC | 781711598351 |
