Find a Service Center
Boston Gear
F710-30-B5-J
700 Series 30:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101800849
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Buna-N is not recommended for use with CIP Sanitizing Agent OXONIA – use EPDM or silicone
| Output Configuration | Right Output |
| Box Height | 3 5/8 in |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Max. Input HP @ 100 rpm | 0.013 hp |
| Rated Efficiency | 69% |
| Use With | 710 |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Lubrication | None |
| Torque Out @ 1750 rpm | 150 in lb |
| Output Speed | 58.3 rpm |
| Shaft Assembly Code | J |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Output (Shaft or Bore) Size | 1/2 in |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Box Width | 3 11/32 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Material | Cast Iron, Standard Paint |
| Fan Cooled | No |
| Torque Out @ 1150 rpm | 133 in lb |
| Family Name | F |
| Housing Material | Cast Iron |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Style | Right Angle |
| Box Length | 4 1/4 in |
| Media Mapping Style | F |
| Bore Code | B5 |
| Frame Size | 56C |
| Output Shaft Projection | Solid Right Output |
| Media Mapping Output | J |
| Base | No |
| Standard | AGMA Service Class I |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Output Torque @ RPM | 133 in lb @ 1150 rpm, 150 in lb @ 1750 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Worm Position | Universal |
| Input Motor HP | 0.17 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Torque | 150 lb-in |
| Input Power Rating | 0.2 hp, 0.149 kW |
| Motor Frame Size | B556C |
| Motor Application | General Purpose |
| Output Bore Shaft Dia. | 0.5 in |
| Base to Centerline of Output Shaft | 1.31 in |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Motor HP | 0.17 hp |
| Input HP @ RPM | 0.1 hp @ 1150 rpm, 0.2 hp @ 1750 rpm |
| Reduction Type | Single |
| Keyway Size | 3/16 x 3/32 |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Center Distance | 1 in |
| Series | 700 |
| Base Mounting Attachment | No Base |
| Center Distance Code | 710 |
| Output Shaft | Solid |
| Input (Shaft or Bore) Size | 5/8 in |
| Frame | 56C |
| Bolt Center | 2 5/8" x 1 11/16" |
| Ratio | 30:1 |
| Input Configuration | C-Face Quilled |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Washdown Duty | No |
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.125 hp @ 1800 rpm |
| Weight | 10.1 LB |
| EAN or UPC | 781711598412 |
