Boston Gear
F710-40-B4-H
700 Series 40:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805897
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base | No |
| Fan Cooled | No |
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.08333333 hp @ 1800 rpm |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Motor Frame Size | B442CZ |
| Center Distance | 1 in |
| Center Distance Code | 710 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Worm Position | Universal |
| Input Power Rating | 0.17 hp, 0.127 kW |
| Output Shaft | Solid |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Lubrication | None |
| Box Length | 4 1/4 in |
| Output Shaft Projection | Solid Double Projecting Output |
| Family Name | F |
| Style | Right Angle |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Box Width | 3 11/32 in |
| Output Configuration | Left & Right Output |
| Series | 700 |
| Rated Efficiency | 62% |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Housing Material | Cast Iron |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Bore Code | B4 |
| Output (Shaft or Bore) Size | 1/2 in |
| Keyway Size | 1/8 x 1/16 |
| Torque Out @ 1150 rpm | 129 in lb |
| Box Height | 3 5/8 in |
| Media Mapping Output | H |
| Output Torque | 151 lb-in |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Reduction Type | Single |
| Output Speed | 43.8 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Frame Size | 42CZ |
| Bolt Center | 2 5/8" x 1 11/16" |
| Input Motor HP | 0.17 |
| Frame | 42CZ |
| Base Mounting Attachment | No Base |
| Media Mapping Style | F |
| Max. Input HP @ 100 rpm | 0.011 hp |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Motor Application | General Purpose |
| Material | Cast Iron, Standard Paint |
| Shaft Assembly Code | H |
| Torque Out @ 1750 rpm | 151 in lb |
| Output Torque @ RPM | 129 in lb @ 1150 rpm, 151 in lb @ 1750 rpm |
| Base to Centerline of Output Shaft | 1.31 in |
| Motor HP | 0.1667 hp |
| Use With | 710 |
| Ratio | 40:1 |
| Input HP @ RPM | 0.081 hp @ 1150 rpm, 0.17 hp @ 1750 rpm |
| Washdown Duty | No |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Output Bore Shaft Dia. | 0.5 in |
| Standard | AGMA Service Class I |
| Input (Shaft or Bore) Size | 1/2 in |
| Input Configuration | C-Face Quilled |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Weight | 10.1 LB |
| EAN or UPC | 781711518656 |
