Find a Service Center
Boston Gear
F710-40-B5-J
700 Series 40:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101795347
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Metal bowl guards are recommended for all applications
- To clean polycarbonate bowls, use mild soap and water only
- do not use cleansing agents such as acetone, benzene, carbon tetrachloride, gasoline, toluene, etc., which damage this plastic
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Motor HP | 0.1667 hp |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Box Height | 3 5/8 in |
| Output Bore Shaft Dia. | 0.5 in |
| Output Shaft Projection | Solid Right Output |
| Torque Out @ 1750 rpm | 151 in lb |
| Center Distance | 1 in |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Box Length | 4 1/4 in |
| Ratio | 40:1 |
| Base Mounting Attachment | No Base |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Standard | AGMA Service Class I |
| Media Mapping Output | J |
| Shaft Assembly Code | J |
| Media Mapping Style | F |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Input Power Rating | 0.17 hp, 0.127 kW |
| Base | No |
| Frame | 56C |
| Base to Centerline of Output Shaft | 1.31 in |
| Use With | 710 |
| Input Configuration | C-Face Quilled |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Box Width | 3 11/32 in |
| Lubrication | None |
| Output (Shaft or Bore) Size | 1/2 in |
| Motor Frame Size | B556C |
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.08333333 hp @ 1800 rpm |
| Bolt Center | 2 5/8" x 1 11/16" |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Torque Out @ 1150 rpm | 129 in lb |
| Material | Cast Iron, Standard Paint |
| Max. Input HP @ 100 rpm | 0.011 hp |
| Input (Shaft or Bore) Size | 5/8 in |
| Worm Position | Universal |
| Motor Application | General Purpose |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Center Distance Code | 710 |
| Series | 700 |
| Input HP @ RPM | 0.081 hp @ 1150 rpm, 0.17 hp @ 1750 rpm |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Output Shaft | Solid |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input Motor HP | 0.17 |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Reduction Type | Single |
| Family Name | F |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Bore Code | B5 |
| Housing Material | Cast Iron |
| Style | Right Angle |
| Fan Cooled | No |
| Output Torque | 151 lb-in |
| Rated Efficiency | 62% |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Frame Size | 56C |
| Output Torque @ RPM | 129 in lb @ 1150 rpm, 151 in lb @ 1750 rpm |
| Output Configuration | Right Output |
| Washdown Duty | No |
| Keyway Size | 3/16 x 3/32 |
| Output Speed | 43.8 rpm |
| Weight | 10.1 LB |
| EAN or UPC | 781711598443 |
