Boston Gear
F710-5-B5-G
700 Series 5:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834818
- 0.5 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Use of external guides or supports is strongly recommended for overhead mounting.
| Shaft Assembly Code | G |
| Base | No |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Box Width | 3 11/32 in |
| Output Torque | 113 lb-in |
| Bore Code | B5 |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Frame | 56C |
| Style | Right Angle |
| Fan Cooled | No |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Reduction Type | Single |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Output (Shaft or Bore) Size | 1/2 in |
| Family Name | F |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Output Speed | 350 rpm |
| Motor Frame Size | B556C |
| Output Shaft Projection | Solid Left Output |
| Standard | AGMA Service Class II |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Input HP @ RPM | 0.4 hp @ 1150 rpm, 0.69 hp @ 1750 rpm |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Max. Input HP @ 100 rpm | 0.044 hp |
| Use With | 710 |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Output Configuration | Left Output |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Box Height | 3 5/8 in |
| Input Configuration | C-Face Quilled |
| Motor Application | General Purpose |
| Worm Position | Universal |
| Output Shaft | Solid |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Media Mapping Style | F |
| Input Power Rating | 0.69 hp, 0.515 kW |
| Center Distance Code | 710 |
| Box Length | 4 1/4 in |
| Torque Out @ 1750 rpm | 113 in lb |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Motor HP | 1/2 hp |
| Torque Out @ 1150 rpm | 98 in lb |
| Output Torque @ RPM | 98 in lb @ 1150 rpm, 113 in lb @ 1750 rpm |
| Frame Size | 56C |
| Series | 700 |
| Base to Centerline of Output Shaft | 1.31 in |
| Output Bore Shaft Dia. | 0.5 in |
| Housing Material | Cast Iron |
| Washdown Duty | No |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Media Mapping Output | G |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Material | Cast Iron, Standard Paint |
| Bolt Center | 2 5/8" x 1 11/16" |
| Input Motor HP | 0.50 |
| Lubrication | None |
| Base Mounting Attachment | No Base |
| Center Distance | 1 in |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Ratio | 5:1 |
| Rated Efficiency | 91% |
| Weight | 10.1 LB |
| EAN or UPC | 781711598269 |
