Find a Service Center
Boston Gear
F710-5-B5-J
700 Series 5:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835180
- 0.5 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Media Mapping Output | J |
| Base to Centerline of Output Shaft | 1.31 in |
| Input Configuration | C-Face Quilled |
| Base | No |
| Worm Position | Universal |
| Housing Material | Cast Iron |
| Lubrication | None |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Bore Code | B5 |
| Output (Shaft or Bore) Size | 1/2 in |
| Input HP @ RPM | 0.4 hp @ 1150 rpm, 0.69 hp @ 1750 rpm |
| Output Configuration | Right Output |
| Box Width | 3 11/32 in |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Center Distance Code | 710 |
| Output Bore Shaft Dia. | 0.5 in |
| Motor Frame Size | B556C |
| Output Torque | 113 lb-in |
| Material | Cast Iron, Standard Paint |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Torque Out @ 1750 rpm | 113 in lb |
| Output Speed | 350 rpm |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Output Torque @ RPM | 98 in lb @ 1150 rpm, 113 in lb @ 1750 rpm |
| Box Length | 4 1/4 in |
| Ratio | 5:1 |
| Output Shaft Projection | Solid Right Output |
| Fan Cooled | No |
| Input Power Rating | 0.69 hp, 0.515 kW |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Frame | 56C |
| Motor Application | General Purpose |
| Family Name | F |
| Use With | 710 |
| Input (Shaft or Bore) Size | 5/8 in |
| Rated Efficiency | 91% |
| Center Distance | 1 in |
| Series | 700 |
| Base Mounting Attachment | No Base |
| Reduction Type | Single |
| Box Height | 3 5/8 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Torque Out @ 1150 rpm | 98 in lb |
| Shaft Assembly Code | J |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Output Shaft | Solid |
| Bolt Center | 2 5/8" x 1 11/16" |
| Standard | AGMA Service Class II |
| Frame Size | 56C |
| Washdown Duty | No |
| Media Mapping Style | F |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Style | Right Angle |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Input Motor HP | 0.50 |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Weight | 10.1 LB |
| EAN or UPC | 781711598283 |
