Boston Gear
F710-50-B4-H
700 Series 50:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809003
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input Motor HP | 0.17 |
| Material | Cast Iron, Standard Paint |
| Output Torque @ RPM | 114 in lb @ 1150 rpm, 153 in lb @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Media Mapping Output | H |
| Washdown Duty | No |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Input (Shaft or Bore) Size | 1/2 in |
| Output RPM @ Input RPM | 35 rpm @ 1750 rpm |
| Bore Code | B4 |
| Torque Out @ 1150 rpm | 114 in lb |
| Input HP @ RPM | 0.06 hp @ 1150 rpm, 0.15 hp @ 1750 rpm |
| Output Torque | 153 lb-in |
| Motor Frame Size | B442CZ |
| Output Bore Shaft Dia. | 0.5 in |
| Input Power Rating | 0.15 hp, 0.112 kW |
| Ratio | 50:1 |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Base | No |
| Box Height | 3 5/8 in |
| Frame | 42CZ |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Output Configuration | Left & Right Output |
| Center Distance Code | 710 |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Style | Right Angle |
| Rated Efficiency | 57% |
| Frame Size | 42CZ |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Output RPM @ 1750 rpm Input | 35 rpm |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Use With | 710 |
| Center Distance | 1 in |
| Output Speed | 35 rpm |
| Max. Input HP @ 100 rpm | 0.008 hp |
| Output (Shaft or Bore) Size | 1/2 in |
| Standard | AGMA Service Class I |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Media Mapping Style | F |
| Box Length | 4 1/4 in |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Base Mounting Attachment | No Base |
| Keyway Size | 1/8 x 1/16 |
| Box Width | 3 11/32 in |
| Motor Application | General Purpose |
| Motor HP | 0.1667 hp |
| Reduction Type | Single |
| Output Shaft | Solid |
| Output Shaft Projection | Solid Double Projecting Output |
| Torque Out @ 1750 rpm | 153 in lb |
| Series | 700 |
| Shaft Assembly Code | H |
| Input Configuration | C-Face Quilled |
| HP @ RPM | 0.08333333 hp @ 1800 rpm |
| Fan Cooled | No |
| Weight | 10.1 LB |
| EAN or UPC | 781711518687 |
