Find a Service Center
Boston Gear
F710-50-B4-J
700 Series 50:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809814
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input Motor HP | 0.17 |
| Use With | 710 |
| HP @ RPM | 0.08333333 hp @ 1800 rpm |
| Series | 700 |
| Bolt Center | 2 5/8" x 1 11/16" |
| Lubrication | None |
| Frame | 42CZ |
| Output Shaft Projection | Solid Right Output |
| Reduction Type | Single |
| Torque Out @ 1750 rpm | 153 in lb |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Frame Size | 42CZ |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Media Mapping Style | F |
| Style | Right Angle |
| Output RPM @ 1750 rpm Input | 35 rpm |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Output Configuration | Right Output |
| Bore Code | B4 |
| Output (Shaft or Bore) Size | 1/2 in |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Ratio | 50:1 |
| Center Distance | 1 in |
| Family Name | F |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Housing Material | Cast Iron |
| Center Distance Code | 710 |
| Washdown Duty | No |
| Box Length | 4 1/4 in |
| Output Speed | 35 rpm |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Output Torque | 153 lb-in |
| Torque Out @ 1150 rpm | 114 in lb |
| Motor Application | General Purpose |
| Input HP @ RPM | 0.06 hp @ 1150 rpm, 0.15 hp @ 1750 rpm |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Box Height | 3 5/8 in |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Max. Input HP @ 100 rpm | 0.008 hp |
| Worm Position | Universal |
| Output Torque @ RPM | 114 in lb @ 1150 rpm, 153 in lb @ 1750 rpm |
| Rated Efficiency | 57% |
| Input Configuration | C-Face Quilled |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input (Shaft or Bore) Size | 1/2 in |
| Base to Centerline of Output Shaft | 1.31 in |
| Input Power Rating | 0.15 hp, 0.112 kW |
| Output Bore Shaft Dia. | 0.5 in |
| Output Shaft | Solid |
| Base | No |
| Base Mounting Attachment | No Base |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Media Mapping Output | J |
| Material | Cast Iron, Standard Paint |
| Keyway Size | 1/8 x 1/16 |
| Shaft Assembly Code | J |
| Motor HP | 0.1667 hp |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Box Width | 3 11/32 in |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Standard | AGMA Service Class I |
| Motor Frame Size | B442CZ |
| Fan Cooled | No |
| Weight | 10.1 LB |
| EAN or UPC | 781711518694 |
