Find a Service Center
Boston Gear
F710-50-B5-G
700 Series 50:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #102207005
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Do not run Worm Gear units over 200 °F.
| Box Length | 4 1/4 in |
| Output Torque | 153 lb-in |
| Fan Cooled | No |
| Series | 700 |
| Base | No |
| Output RPM @ Input RPM | 35 rpm @ 1750 rpm |
| Output Configuration | Left Output |
| Bore Code | B5 |
| Output Torque @ RPM | 114 in lb @ 1150 rpm, 153 in lb @ 1750 rpm |
| Shaft Assembly Code | G |
| Output RPM @ 1750 rpm Input | 35 rpm |
| Reduction Type | Single |
| Lubrication | None |
| Output (Shaft or Bore) Size | 1/2 in |
| Torque Out @ 1750 rpm | 153 in lb |
| Motor Frame Size | B556C |
| Frame | 56C |
| Media Mapping Style | F |
| HP @ RPM | 0.08333333 hp @ 1800 rpm |
| Input Configuration | C-Face Quilled |
| Output Shaft | Solid |
| Bolt Center | 2 5/8" x 1 11/16" |
| Motor Application | General Purpose |
| Family Name | F |
| Standard | AGMA Service Class I |
| Housing Material | Cast Iron |
| Base Mounting Attachment | No Base |
| Material | Cast Iron, Standard Paint |
| Washdown Duty | No |
| Center Distance | 1 in |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Input Motor HP | 0.17 |
| Torque Out @ 1150 rpm | 114 in lb |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Media Mapping Output | G |
| Input Power Rating | 0.15 hp, 0.112 kW |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Output Shaft Projection | Solid Left Output |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Rated Efficiency | 57% |
| Base to Centerline of Output Shaft | 1.31 in |
| Output Speed | 35 rpm |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Use With | 710 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Style | Right Angle |
| Input (Shaft or Bore) Size | 5/8 in |
| Ratio | 50:1 |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Input HP @ RPM | 0.06 hp @ 1150 rpm, 0.15 hp @ 1750 rpm |
| Center Distance Code | 710 |
| Box Width | 3 11/32 in |
| Box Height | 3 5/8 in |
| Worm Position | Universal |
| Output Bore Shaft Dia. | 0.5 in |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Frame Size | 56C |
| Weight | 10.1 LB |
| EAN or UPC | 781711598450 |
