Find a Service Center
Boston Gear
F713-10-B5-H
700 Series 10:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835990
- 0.75 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Shaft Assembly Code | H |
| Reduction Type | Single |
| Max. Input HP @ 100 rpm | 0.06 hp |
| Use With | 713 |
| Box Width | 4.03 in |
| Motor Frame Size | B556C |
| Input Motor HP | 0.75 |
| Output Torque | 281 lb-in |
| Torque Out @ 1150 rpm | 243 in lb |
| Frame Size | 56C |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Output Shaft | Solid |
| Input (Shaft or Bore) Size | 5/8 in |
| Torque Out @ 1750 rpm | 281 in lb |
| Output (Shaft or Bore) Size | 5/8 in |
| Ratio | 10:1 |
| Fan Cooled | No |
| Bolt Center | 3 1/4" x 2" |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Frame | 56C |
| Input Power Rating | 0.86 hp, 0.641 kW |
| Base Mounting Attachment | No Base |
| Media Mapping Output | H |
| Center Distance | 1.33 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Material | Cast Iron, Standard Paint |
| Washdown Duty | No |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Lubrication | None |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Bore Code | B5 |
| Input Configuration | C-Face Quilled |
| Output Configuration | Left & Right Output |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Family Name | F |
| Base to Centerline of Output Shaft | 1.72 in |
| Series | 700 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Worm Position | Universal |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Output Torque @ RPM | 243 in lb @ 1150 rpm, 281 in lb @ 1750 rpm |
| Output Speed | 175 rpm |
| Media Mapping Style | F |
| Motor HP | 3/4 hp |
| Base | No |
| Style | Right Angle |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Motor Application | General Purpose |
| Output Bore Shaft Dia. | 0.625 in |
| Standard | AGMA Service Class I |
| Box Length | 4 1/4 in |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Box Height | 4 21/32 in |
| Housing Material | Cast Iron |
| Rated Efficiency | 91% |
| Output Shaft Projection | Solid Double Projecting Output |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input HP @ RPM | 0.51 hp @ 1150 rpm, 0.86 hp @ 1750 rpm |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Center Distance Code | 713 |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Weight | 13.1 LB |
| EAN or UPC | 781711518748 |
