Find a Service Center
Boston Gear
F7713-15-B5-G
700 Series 15:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805899
- 0.5 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Shaft Projection | Solid Left Output |
| Rated Efficiency | 86% |
| Lubrication | None |
| Motor Frame Size | B556C |
| Media Mapping Style | F |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| HP @ RPM | 0.5 hp @ 1800 rpm, 0.3333333 hp @ 1200 rpm |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Frame Size | 56C |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Use With | 713 |
| Input (Shaft or Bore) Size | 5/8 in |
| Center Distance | 1.33 in |
| Box Length | 4 1/4 in |
| Output (Shaft or Bore) Size | 5/8 in |
| Input HP @ RPM | 0.66 hp @ 1750 rpm, 0.37 hp @ 1150 rpm |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Housing Material | Cast Iron |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Output Bore Shaft Dia. | 0.625 in |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Base | No |
| Base Mounting Attachment | No Base |
| Material | Cast Iron, Standard Paint |
| Washdown Duty | No |
| Output Torque Rating Range [Max] | 499 lb-in, 34 Nm |
| Output Speed | 116.7 rpm |
| Input Motor HP | 0.50 |
| Output Torque Rating Range [Min] | 300 lb-in, 10 Nm |
| Output Shaft | Solid |
| Ratio | 15:1 |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Fan Cooled | No |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Family Name | F |
| Motor Application | General Purpose |
| Shaft Assembly Code | G |
| Style | Right Angle |
| Input Configuration | C-Face Quilled |
| Bore Code | B5 |
| Reduction Type | Single |
| Center Distance Code | 713 |
| Motor HP | 1/2 hp |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Output Configuration | Left Output |
| Box Width | 4.03 in |
| Standard | AGMA Service Class II |
| Base to Centerline of Output Shaft | 1.72 in |
| Bolt Pattern | 3.25 x 2 |
| Worm Position | Universal |
| Media Mapping Output | G |
| Frame | 56C |
| Bolt Center | 3 1/4" x 2" |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Output Torque @ RPM | 305 in lb @ 1750 rpm, 262 in lb @ 1150 rpm |
| Output Torque | 305 lb-in |
| Max. Input HP @ 100 rpm | 0.049 hp |
| Torque Out @ 1150 rpm | 262 in lb |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Input Power Rating | 0.66 hp, 0.492 kW |
| Series | 700 |
| Box Height | 4 21/32 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Torque Out @ 1750 rpm | 305 in lb |
| Weight | 13.1 LB |
| EAN or UPC | 781711518762 |
