Find a Service Center
Boston Gear
F713-25-B5-H
700 Series 25:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101870627
- 0.33 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Use With | 713 |
| Frame | 56C |
| Ratio | 25:1 |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Frame Size | 56C |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Series | 700 |
| Box Height | 4 21/32 in |
| Output Configuration | Left & Right Output |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Output Torque | 307 lb-in |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Family Name | F |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Style | Right Angle |
| Motor HP | 0.33 hp |
| Output Shaft Projection | Solid Double Projecting Output |
| Worm Position | Universal |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Box Length | 4 1/4 in |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Keyway Size | 3/16 x 3/32 |
| Lubrication | None |
| Reduction Type | Single |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Input Power Rating | 0.43 hp, 0.321 kW |
| Housing Material | Cast Iron |
| Torque Out @ 1750 rpm | 307 in lb |
| Input HP @ RPM | 0.24 hp @ 1150 rpm, 0.43 hp @ 1750 rpm |
| Washdown Duty | No |
| Shaft Assembly Code | H |
| Input (Shaft or Bore) Size | 5/8 in |
| Box Width | 4.03 in |
| Bore Code | B5 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Center Distance | 1.33 in |
| Rated Efficiency | 79% |
| Fan Cooled | No |
| Output Shaft | Solid |
| Output Torque @ RPM | 260 in lb @ 1150 rpm, 307 in lb @ 1750 rpm |
| Output (Shaft or Bore) Size | 5/8 in |
| Input Motor HP | 0.33 |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Input Configuration | C-Face Quilled |
| Material | Cast Iron, Standard Paint |
| Bolt Center | 3 1/4" x 2" |
| Output Speed | 70 rpm |
| Base | No |
| Base Mounting Attachment | No Base |
| Output Bore Shaft Dia. | 0.625 in |
| Media Mapping Style | F |
| Standard | AGMA Service Class II |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Torque Out @ 1150 rpm | 260 in lb |
| Base to Centerline of Output Shaft | 1.72 in |
| Center Distance Code | 713 |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Max. Input HP @ 100 rpm | 0.031 hp |
| Media Mapping Output | H |
| Motor Application | General Purpose |
| Motor Frame Size | B556C |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Weight | 13.1 LB |
| EAN or UPC | 781711518830 |
