Find a Service Center
Boston Gear
F7713-25-B5-J
700 Series 25:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101872262
- 0.33 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Output Bore Shaft Dia. | 0.625 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Center Distance Code | 713 |
| Keyway Size | 3/16 x 3/32 |
| Fan Cooled | No |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Motor HP | 0.33 hp |
| Torque Out @ 1150 rpm | 260 in lb |
| Box Height | 4 21/32 in |
| Motor Frame Size | B556C |
| Center Distance | 1.33 in |
| Shaft Assembly Code | J |
| Torque Out @ 1750 rpm | 307 in lb |
| Max. Input HP @ 100 rpm | 0.031 hp |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Output Torque @ RPM | 260 in lb @ 1150 rpm, 307 in lb @ 1750 rpm |
| Output Configuration | Right Output |
| Series | 700 |
| Output Torque | 307 lb-in |
| Output Shaft Projection | Solid Right Output |
| Frame | 56C |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Input Configuration | C-Face Quilled |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Standard | AGMA Service Class II |
| Bolt Center | 3 1/4" x 2" |
| Output Speed | 70 rpm |
| Media Mapping Output | J |
| Base to Centerline of Output Shaft | 1.72 in |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Housing Material | Cast Iron |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Use With | 713 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Ratio | 25:1 |
| Motor Application | General Purpose |
| Output (Shaft or Bore) Size | 5/8 in |
| Input HP @ RPM | 0.24 hp @ 1150 rpm, 0.43 hp @ 1750 rpm |
| Style | Right Angle |
| Input Motor HP | 0.33 |
| Washdown Duty | No |
| Rated Efficiency | 79% |
| Base | No |
| Material | Cast Iron, Standard Paint |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Reduction Type | Single |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Frame Size | 56C |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Box Length | 4 1/4 in |
| Input Power Rating | 0.43 hp, 0.321 kW |
| Input (Shaft or Bore) Size | 5/8 in |
| Box Width | 4.03 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Output Shaft | Solid |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Worm Position | Universal |
| Media Mapping Style | F |
| Bore Code | B5 |
| Family Name | F |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Base Mounting Attachment | No Base |
| Lubrication | None |
| Weight | 13.1 LB |
| EAN or UPC | 781711518847 |
