Find a Service Center
Boston Gear
F7713-30-B5-H
700 Series 30:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805900
- 0.33 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base | No |
| Worm Position | Universal |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Base Mounting Attachment | No Base |
| Housing Material | Cast Iron |
| Reduction Type | Single |
| Output Torque @ RPM | 270 in lb @ 1150 rpm, 311 in lb @ 1750 rpm |
| Input HP @ RPM | 0.21 hp @ 1150 rpm, 0.39 hp @ 1750 rpm |
| Standard | AGMA Service Class I |
| Input Motor HP | 0.33 |
| Bore Code | B5 |
| Bolt Center | 3 1/4" x 2" |
| Family Name | F |
| Shaft Assembly Code | H |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Lubrication | None |
| Max. Input HP @ 100 rpm | 0.029 hp |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Base to Centerline of Input Shaft | 3.0625 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Center Distance Code | 713 |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Input Power Rating | 0.39 hp, 0.291 kW |
| Output (Shaft or Bore) Size | 5/8 in |
| Media Mapping Style | F |
| Washdown Duty | No |
| Rated Efficiency | 74% |
| Output Shaft Projection | Solid Double Projecting Output |
| Box Length | 4 1/4 in |
| Media Mapping Output | H |
| Output Configuration | Left & Right Output |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Frame Size | 56C |
| Center Distance | 1.33 in |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Motor HP | 1/4 hp |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Output Shaft | Solid |
| Box Width | 4.03 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Input Configuration | C-Face Quilled |
| Output Speed | 58.3 rpm |
| Ratio | 30:1 |
| Motor Frame Size | B556C |
| Fan Cooled | No |
| Torque Out @ 1750 rpm | 311 in lb |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Material | Cast Iron, Standard Paint |
| Use With | 713 |
| Box Height | 4 21/32 in |
| Base to Centerline of Output Shaft | 1.72 in |
| Frame | 56C |
| Output Torque | 311 lb-in |
| Torque Out @ 1150 rpm | 270 in lb |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.25 hp @ 1800 rpm |
| Style | Right Angle |
| Output Bore Shaft Dia. | 0.625 in |
| Keyway Size | 3/16 x 3/32 |
| Series | 700 |
| Motor Application | General Purpose |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Weight | 13.1 LB |
| EAN or UPC | 781711518861 |
