Find a Service Center
Boston Gear
F7713-40-B5-J
700 Series 40:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101807797
- 0.25 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input HP @ RPM | 0.31 hp @ 1750 rpm, 0.18 hp @ 1150 rpm |
| Worm Position | Universal |
| Bolt Center | 3 1/4" x 2" |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Frame | 56C |
| Center Distance Code | 713 |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Reduction Type | Single |
| HP @ RPM | 0.1666667 hp @ 1800 rpm, 0.1666667 hp @ 1200 rpm |
| Output Torque | 307 lb-in |
| Family Name | F |
| Ratio | 40:1 |
| Housing Material | Cast Iron |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Series | 700 |
| Output Configuration | Right Output |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Input Motor HP | 0.25 |
| Rated Efficiency | 69% |
| Fan Cooled | No |
| Output Speed | 43.8 rpm |
| Keyway Size | 3/16 x 3/32 |
| Output RPM @ 1750 rpm Input | 44 rpm |
| Style | Right Angle |
| Motor HP | 0.1667 hp |
| Media Mapping Style | F |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Torque Out @ 1150 rpm | 265 in lb |
| Use With | 713 |
| Standard | AGMA Service Class II |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Motor Frame Size | B556C |
| Motor Application | General Purpose |
| Shaft Assembly Code | J |
| Box Height | 4 21/32 in |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Input Power Rating | 0.31 hp, 0.231 kW |
| Base | No |
| Output (Shaft or Bore) Size | 5/8 in |
| Output Torque @ RPM | 307 in lb @ 1750 rpm, 265 in lb @ 1150 rpm |
| Box Width | 4.03 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Bolt Pattern | 3.25 x 2 |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Output Shaft | Solid |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Bore Code | B5 |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Torque Out @ 1750 rpm | 307 in lb |
| Base to Centerline of Output Shaft | 1.72 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Media Mapping Output | J |
| Output Shaft Projection | Solid Right Output |
| Material | Cast Iron, Standard Paint |
| Washdown Duty | No |
| Lubrication | None |
| Frame Size | 56C |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Max. Input HP @ 100 rpm | 0.025 hp |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Box Length | 4 1/4 in |
| Input Configuration | C-Face Quilled |
| Output Bore Shaft Dia. | 0.625 in |
| Center Distance | 1.33 in |
| Base Mounting Attachment | No Base |
| Weight | 13.1 LB |
| EAN or UPC | 781711518908 |
