Find a Service Center
Boston Gear
F7715-10-B5-H
700 Series 10:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #100848242
- 1 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Standard | AGMA Service Class I |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Shaft Assembly Code | H |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Series | 700 |
| Output Speed | 175 rpm |
| Output Shaft | Solid |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Input Motor HP | 1 |
| Keyway Size | 3/16 x 3/32 |
| Motor Frame Size | B556C |
| Style | Right Angle |
| Washdown Duty | No |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Output Torque @ RPM | 350 in lb @ 1150 rpm, 397 in lb @ 1750 rpm |
| Motor Application | General Purpose |
| Box Length | 5 1/8 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Media Mapping Output | H |
| Input Configuration | C-Face Quilled |
| Base | No |
| Housing Material | Cast Iron |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Box Width | 5 1/16 in |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Family Name | F |
| Ratio | 10:1 |
| Max. Input HP @ 100 rpm | 0.086 hp |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Frame | 56C |
| Box Height | 5 3/8 in |
| Torque Out @ 1750 rpm | 397 in lb |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| HP @ RPM | 1 hp @ 1800 rpm |
| Bore Code | B5 |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Bore Shaft Dia. | 0.75 in |
| Base Mounting Attachment | No Base |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Output Torque | 397 lb-in |
| Output Configuration | Left & Right Output |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Lubrication | None |
| Center Distance | 1.54 in |
| Input HP @ RPM | 0.73 hp @ 1150 rpm, 1.2 hp @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Fan Cooled | No |
| Frame Size | 56C |
| Media Mapping Style | F |
| Input Power Rating | 1.2 hp, 0.895 kW |
| Rated Efficiency | 92% |
| Worm Position | Universal |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Reduction Type | Single |
| Use With | 715 |
| Output (Shaft or Bore) Size | 3/4 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Output Shaft Projection | Solid Double Projecting Output |
| Center Distance Code | 715 |
| Motor HP | 1 hp |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Base to Centerline of Output Shaft | 1.91 in |
| Torque Out @ 1150 rpm | 350 in lb |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Weight | 17.1 LB |
| EAN or UPC | 781711519011 |
