Find a Service Center
Boston Gear
F7715-10-B5-J
700 Series 10:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834958
- 1 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque | 397 lb-in |
| Frame Size | 56C |
| HP @ RPM | 1 hp @ 1800 rpm |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Series | 700 |
| Output Shaft | Solid |
| Worm Position | Universal |
| Torque Out @ 1150 rpm | 350 in lb |
| Input Configuration | C-Face Quilled |
| Box Width | 5 1/16 in |
| Box Height | 5 3/8 in |
| Motor Frame Size | B556C |
| Motor HP | 1 hp |
| Base Mounting Attachment | No Base |
| Bore Code | B5 |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Keyway Size | 3/16 x 3/32 |
| Shaft Assembly Code | J |
| Media Mapping Style | F |
| Output Bore Shaft Dia. | 0.75 in |
| Torque Out @ 1750 rpm | 397 in lb |
| Material | Cast Iron, Standard Paint |
| Style | Right Angle |
| Fan Cooled | No |
| Frame | 56C |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Lubrication | None |
| Base to Centerline of Output Shaft | 1.91 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Motor Application | General Purpose |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Family Name | F |
| Washdown Duty | No |
| Max. Overhung Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Reduction Type | Single |
| Center Distance Code | 715 |
| Output (Shaft or Bore) Size | 3/4 in |
| Rated Efficiency | 92% |
| Max. Thrust Load @ RPM | 400 lb/in @ 1750 rpm, 400 lb/in @ 1150 rpm |
| Housing Material | Cast Iron |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Center Distance | 1.54 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Base | No |
| Max. Input HP @ 100 rpm | 0.086 hp |
| Output Shaft Projection | Solid Right Output |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Input Motor HP | 1 |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Output Torque @ RPM | 397 in lb @ 1750 rpm, 350 in lb @ 1150 rpm |
| Media Mapping Output | J |
| Box Length | 5 1/8 in |
| Output Speed | 175 rpm |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Configuration | Right Output |
| Input Power Rating | 1.2 hp, 0.895 kW |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Standard | AGMA Service Class I |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Use With | 715 |
| Ratio | 10:1 |
| Input HP @ RPM | 1.2 hp @ 1750 rpm, 0.73 hp @ 1150 rpm |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Weight | 17.1 LB |
| EAN or UPC | 781711519028 |
