Find a Service Center
Boston Gear
F715-15-B5-H
700 Series 15:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809375
- 0.75 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Media Mapping Output | H |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Shaft | Solid |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Input Configuration | C-Face Quilled |
| Base Mounting Attachment | No Base |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Max. Input HP @ 100 rpm | 0.07 hp |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Output Bore Shaft Dia. | 0.75 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Motor HP | 3/4 hp |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Base to Centerline of Output Shaft | 1.91 in |
| Frame Size | 56C |
| Standard | AGMA Service Class I |
| Output Torque | 429 lb-in |
| Box Length | 5 1/8 in |
| Center Distance | 1.54 in |
| Reduction Type | Single |
| Housing Material | Cast Iron |
| Frame | 56C |
| Style | Right Angle |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Output (Shaft or Bore) Size | 3/4 in |
| Material | Cast Iron, Standard Paint |
| Shaft Assembly Code | H |
| Motor Frame Size | B556C |
| Torque Out @ 1150 rpm | 376 in lb |
| Motor Application | General Purpose |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Output Torque @ RPM | 376 in lb @ 1150 rpm, 428 in lb @ 1750 rpm |
| Input HP @ RPM | 0.53 hp @ 1150 rpm, 0.91 hp @ 1750 rpm |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Ratio | 15:1 |
| Washdown Duty | No |
| Fan Cooled | No |
| Bore Code | B5 |
| Family Name | F |
| Box Height | 5 3/8 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Use With | 715 |
| Series | 700 |
| Rated Efficiency | 87% |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Output Shaft Projection | Solid Double Projecting Output |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Output Configuration | Left & Right Output |
| Box Width | 5 1/16 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Input Motor HP | 0.75 |
| Lubrication | None |
| Worm Position | Universal |
| Media Mapping Style | F |
| Torque Out @ 1750 rpm | 428 in lb |
| Keyway Size | 3/16 x 3/32 |
| Input Power Rating | 0.91 hp, 0.679 kW |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Base | No |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Output Speed | 116.7 rpm |
| HP @ RPM | 0.5 hp @ 1800 rpm |
| Center Distance Code | 715 |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Weight | 17.1 LB |
| EAN or UPC | 781711519042 |
