Find a Service Center
Boston Gear
F715-25-B5-G
700 Series 25:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835849
- 0.5 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Worm Position | Universal |
| Use With | 715 |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Input Power Rating | 0.6 hp, 0.447 kW |
| Reduction Type | Single |
| Base | No |
| Input Motor HP | 0.50 |
| Frame Size | 56C |
| Series | 700 |
| Input Configuration | C-Face Quilled |
| Material | Cast Iron, Standard Paint |
| Output Configuration | Left Output |
| Media Mapping Output | G |
| Center Distance Code | 715 |
| Fan Cooled | No |
| Input HP @ RPM | 0.35 hp @ 1150 rpm, 0.6 hp @ 1750 rpm |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Base Mounting Attachment | No Base |
| Media Mapping Style | F |
| Base to Centerline of Output Shaft | 1.91 in |
| Shaft Assembly Code | G |
| Output (Shaft or Bore) Size | 3/4 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Output Torque | 437 lb-in |
| Output Shaft Projection | Solid Left Output |
| Motor HP | 1/2 hp |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Torque Out @ 1150 rpm | 375 in lb |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Output Shaft | Solid |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Max. Input HP @ 100 rpm | 0.043 hp |
| Torque Out @ 1750 rpm | 437 in lb |
| Frame | 56C |
| Center Distance | 1.54 in |
| Lubrication | None |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Width | 5 1/16 in |
| Motor Frame Size | B556C |
| Box Height | 5 3/8 in |
| Family Name | F |
| Output Bore Shaft Dia. | 0.75 in |
| Ratio | 25:1 |
| Washdown Duty | No |
| Rated Efficiency | 81% |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Output Torque @ RPM | 375 in lb @ 1150 rpm, 437 in lb @ 1750 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Speed | 70 rpm |
| Bore Code | B5 |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Box Length | 5 1/8 in |
| Standard | AGMA Service Class I |
| Motor Application | General Purpose |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Style | Right Angle |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Housing Material | Cast Iron |
| Weight | 17.1 LB |
| EAN or UPC | 781711519097 |
