Find a Service Center
Boston Gear
F7715-40-B5-H
700 Series 40:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835796
- 0.33 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque | 442 lb-in |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Input Power Rating | 0.43 hp, 0.321 kW |
| Center Distance Code | 715 |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Series | 700 |
| Base Mounting Attachment | No Base |
| Rated Efficiency | 71% |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Center Distance | 1.54 in |
| Output Torque @ RPM | 380 in lb @ 1150 rpm, 441 in lb @ 1750 rpm |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Output Configuration | Left & Right Output |
| Material | Cast Iron, Standard Paint |
| Keyway Size | 3/16 x 3/32 |
| Bore Code | B5 |
| Output Shaft Projection | Solid Double Projecting Output |
| Reduction Type | Single |
| Use With | 715 |
| Output Shaft | Solid |
| Output Speed | 43.8 rpm |
| Housing Material | Cast Iron¦White Epoxy Coating |
| Input Configuration | C-Face Quilled |
| Media Mapping Style | F |
| Max. Input HP @ 100 rpm | 0.036 hp |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Standard | AGMA Service Class II |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Torque Out @ 1750 rpm | 441 in lb |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Ratio | 40:1 |
| Box Length | 5 1/8 in |
| Motor Frame Size | B556C |
| Output (Shaft or Bore) Size | 3/4 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Shaft Assembly Code | H |
| Motor Application | Washdown Duty |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Frame | 56C |
| Family Name | F |
| Input Motor HP | 0.33 |
| Box Height | 5 3/8 in |
| Style | Right Angle |
| Frame Size | 56C |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Base to Centerline of Output Shaft | 1.91 in |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Washdown Duty | Yes |
| Worm Position | Universal |
| Motor HP | 0.3333 hp |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Media Mapping Output | H |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Torque Out @ 1150 rpm | 380 in lb |
| Input HP @ RPM | 0.24 hp @ 1150 rpm, 0.43 hp @ 1750 rpm |
| Fan Cooled | No |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Output Bore Shaft Dia. | 0.75 in |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Lubrication | None |
| Base | No |
| Box Width | 5 1/16 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Weight | 17.1 LB |
| EAN or UPC | 781711519165 |
