- 700 Series
- 1.54 in Center Distance
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Steel housings must be used for operating pressures above 3,000 psi
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Torque Out @ 1150 rpm | 312 in lb |
| Shaft Assembly Code | H |
| Series | 700 |
| Base | No |
| Base to Centerline of Output Shaft | 1.91 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Input HP @ RPM | 0.164 hp @ 1150 rpm, 0.28 hp @ 1750 rpm |
| Fan Cooled | No |
| Output Configuration | Left & Right Output |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Output Torque @ RPM | 312 in lb @ 1150 rpm, 399 in lb @ 1750 rpm |
| Box Height | 5 3/8 in |
| Worm Position | Universal |
| Box Width | 5 1/16 in |
| Center Distance Code | 715 |
| Lubrication | None |
| Input Configuration | C-Face Quilled |
| Center Distance | 1.54 in |
| Frame Size | 56C |
| Box Length | 5 1/8 in |
| Output Shaft Projection | Solid Double Projecting Output |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Bore Code | B5 |
| Motor Application | General Purpose |
| Use With | 715 |
| Output Shaft | Solid |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Style | Right Angle |
| Output (Shaft or Bore) Size | 3/4 in |
| Washdown Duty | No |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Reduction Type | Single Reduction |
| Ratio | 60:1 |
| Torque Out @ 1750 rpm | 399 in lb |
| Input (Shaft or Bore) Size | 5/8 in |
| Housing Material | Cast Iron |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Frame | 56C |
| Output Bore Shaft Dia. | 0.75 in |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Base to Centerline of Input Shaft | 3.4375 in |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Family Name | F |
| HP @ RPM | 0.125 hp @ 1200 rpm, 0.1666667 hp @ 1800 rpm |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.022 hp |
| Weight | 17.1 LB |
| EAN or UPC | 781711439630 |

